Risk Factors for Work Fatigue in Welding Workers in the Oil and Gas Industry: Literature Review
Abstract
Introduction: Welding workers in the Oil and Gas Industry are often exposed to heat sources such as sunlight and welding machines, especially when working outdoors. The welding process involves cutting, heating, grinding, joining, painting, and sanding, which can lead to significant fatigue, impacting their health and safety.
Objective: Workers who do welding are often exposed to heat sources, including sunlight and heat from welding machines because some employees do welding outdoors. Cutting iron, heating, grinding, joining, painting, and sanding are steps in the welding process carried out in a work environment exposed to sunlight. Thus, is fatigue a risk for welding workers in the Oil and Gas Industry. This study aims to determine the level of risk of causing work fatigue in welding workers in the Oil and Gas Industry.
Method: This study is a systematic literature review using the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta Analyses) method. Literature searches were obtained from Google Scholar, Science Direct, and Neliti Jurnal. The keywords "risk of causing work fatigue" and "Risk of Causing Work Fatigue" and "work fatigue in welding workers" and "work fatigue in welding workers" were used in articles published from 2019-2023. with international journal rankings Q1 and Q2.
Result: A total of 105 articles were found, but only 16 articles were suitable for use after going through an elimination process that was adjusted to the research topic, passed duplication, and could be accessed in full. There are four risk factors for work fatigue in welding, namely, too much work, lack of time, conflict with welding workers, and the nature of ambiguity in each worker.
Conclusion: This finding is useful for knowing the risk factors for work fatigue in welding workers, there are four factors, namely, too much work, lack of time, conflict with welding workers, and the nature of ambiguity in each worker. To reduce the risk at work is by socializing related to occupational safety and health, increasing awareness of the importance of health and safety for workers with the aim of creating safe working conditions and ensuring occupational safety and health.
References
Zetli, S. (2018). PENGUKURAN KELELAHAN KERJA PADA SOPIR ANGKUTAN UMUM DALAM UPAYA MENGETAHUI FAKTOR KECELAKAAN TRANSPORTASI UMUM DI KOTA BATAM. Jurnal Rekayasa Sistem Industri, 11-17.
Kusuma, M. A. (2022). ANALISIS FAKTOR RISIKO KELELAHAN PADA PEKERJA MUDA DI PROYEK KONSTRUKSI PT. ABC. Prosiding Forum Ilmiah Tahunan IAKMI (Ikatan Ahli Kesehatan Masyarakat Indonesia), 1-10.
Zurriyah. (2018). Faktor Yang Berhubungan Dengan Kecelakaan Kerja Pada Bengkel Las Di Bengkel Las Kota Makassar. 761-769.
Widajati. (2017). Risk Assessment Pada Pekerja Pengelasan Perkapalan Dengan Pendekatan Job Safety Analisisys. ;5(4):148–157.
Haslinda. (2023). INGKAT KELELAHAN DAN STRES KERJA DENGAN MENGGUNAKAN METODE SUBJECTIVE SELF RATING TEST (SRRT) PADA OPERATOR PENGELASAN. Prosiding Seminar Nasional Teknologi Industri X 2023, 156-163.
Jumartika, S. (2021). ANALISIS RISIKO PADA PEKERJA PENGELASAN DI PT. INDUSTRI KAPAL INDONESIA (PERSERO) KOTA MAKASSAR. Window Of Publich Health, 328-338.
Juliana, M. (2018). ANALISIS FAKTOR RISIKO KELELAHAN KERJA PADA KARYAWAN BAGIAN PRODUKSI PT. ARWANA ANUGRAH KERAMIK, Tbk. Jurnal Ilmu Kesehatan Masyarakat, Maret 2018, 9(1):53-63, 53-63.
Husein, M. (2022). Hubungan Faktor Pekerja dan Intensitas Cahaya Las Dengan Kelelahan Mata Pada Pekerja. Jurnal Ilmiah Universitas Batanghari Jambi, 339-343.
Riyadi, S. (2021). Faktor Penyebab Terjadinya Kelelahan Kerja Pada Pekerja Pt. Dungo Reksa Di Minas. Jurnal Pengabdian Kesehatan Komunitas, 32-37.
Faedah, N. F. (2023). ANALISIS BAHAYA KESEHATAN PADA TUKANG LAS. Journal of Innovation Research and Knowledge, 1-12.
Bramantyo, M. F. (2022). ANALISIS FAKTOR-FAKTOR PENYEBAB KELELAHAN KERJA DENGAN METODE SUBJECTIVE SELF RATING TEST (STUDI KASUS: PEKERJA BAGIAN LANTAI PRODUKSI PT. MARABUNTA BERKARYA CEPERINDO). 1-10.
Ristanti, A. N. (2023). Faktor-Faktor yang Berhubungan dengan Keluhan Gangguan Fungsi Penglihatan pada Pekerja Pengelasan di Wilayah Kedaung Kali Angke dan Kelurahan Kapuk, Kecamatan Cengkareng Jakarta Barat. Jurnal Ilmiah Kesehatan Masyarakat, 1-6.
Oktriansyah. (2021). HUBUNGAN AKTIVITAS PENGELASAN DENGAN KELUHAN KELELAHAN HUBUNGAN AKTIVITAS PENGELASAN DENGAN KELUHAN KELELAHAN KABUPATEN BOGOR TAHUN 2019. Jurnal Mahasiswa Kesehatan Masyarakat , 259-268.
Megaranti, S. A. (2022). Analisis Faktor Risiko Keluhan Fatigue Pada Pramudi BRT (Bus Rapid Transit) Transjakarta Tahun 2022. NATIONAL JOURNAL OF OCCUPATIONAL HEALTH AND SAFETY (NJOHS), 84-98.
Febriana, D. A. (2023). Analisis Faktor Risiko Kelelahan Kerja pada Kurir PT Tiki Jalur Ekakurir (JNE) di Wilayah Kecamatan Pondok Gede Kota Bekasi tahun 2022. NATIONAL JOURNAL OF OCCUPATIONAL HEALTH AND SAFETY (NJOHS), 15-26.
Fan, X. (2023). Investigation and analysis of the safety risk factors of aging construction workers. Safety Science, 1-10.
Bendak, S. (2020). Fatigue in aviation: A systematic review of the literature. Safety Science, 1-9.
ANALISIS TINGKAT KELELAHAN DAN STRES KERJA DENGAN MENGGUNAKAN METODE SUBJECTIVE SELF RATING TEST (SRRT) PADA OPERATOR PENGELASAN. (2023). Prosiding Seminar Nasional Teknologi Industri X 2023, e-ISSN 2964-1896, 156-163.
Copyright (c) 2024 Media Publikasi Promosi Kesehatan Indonesia (MPPKI)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with Journal of Public Health and Pharmacy retain the copyright of their work. The journal applies a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0), which grants the following rights:
-
Copyright Retention: Authors retain the copyright of their work, maintaining full control over their intellectual property without restrictions.
-
Right of First Publication: Authors grant the journal the right of first publication of their work. This ensures that the work is initially published and credited in Journal of Public Health and Pharmacy.
-
License to Share and Reuse: The work is licensed under CC BY-SA 4.0, allowing others to copy, distribute, remix, and build upon the work for any purpose, even commercially, as long as proper credit is given to the authors, and any new creations are licensed under the same terms.
